Rotational Moulding Machinery Home | Product Range | Send Inquiry
Rotational moulding machinery

 Rotational moulding machinery manufacturers and suppliers

Rotational Moulds for Pallets

Rotational Moulds for Pallets

Rotational Molding also termed as rotational casting and rotomolding has emerged as one of the fastest developing plastics processing methods of present time. Rotational Moulds for pallets are made using advance technology, and used to make hollow items of different sizes, which may be open or closed. Therefore, pallets made through these moulds get the desired shape and then can be used for storage purposes. Rotational Moulds for pallets adopt Rotomolding techniques, which is way ahead than the techniques of injection molding, blow molding and thermoforming. In most of the cases, the products that are quite impossible to get fabricated from other process, rotational molding makes it very easy.

Rotational Moulds for Pallets are absolutely stress free, aside from the fact of slight shrinkage forces, which occurs as the products are produced without any kind of support of external pressure. In addition, in Rotaional Moulds the end-product is developed without leaving any kind of scrap, which is a big advantage in itself. As far as the uniformity of wall thickness is concerned, it is maintained within ±10 percent that is quite better than that of during blow molding processing. The wall thickness stretches from1/32 inch to 1 inch (0.8mm to 25mm). Most of the resins used in rotational molding are in the form of powder ground to 35 mesh and varies in diameter from 74 microns to 2000 microns. All these ascertains optimal productive worth of Rotational Moulds for Pallets in terms of longevity, design and finish.

Advantages of Pallets Rotational Moulds:
  • Cost-effective Tooling Process
  • Single piece configuration, which is stress free totally enclosed parts or comes with openings
  • Significant weight reduction as compared to most of metals
  • There is uniformity in wall thickness
  • The thickness ratio can be adjusted as per requirement
  • Highly resistant to corrosion and stress cracking
  • Metal insert as an integral part
  • There is flexibility in design
  • Various kinds of finishes and colors available

Send Inquiry
Home | Product Range | Sourcing Requirments | Rotational FAQS?